• Oregon Coast Hotels and Accomodations
  • Oregon Coast Restaurants

Oregon Coast Adventure

~ Enjoy Beautiful Oregon

Oregon Coast Adventure

Monthly Archives: January 2015

Oregon North Coast Boat Launch Locations

20 Tuesday Jan 2015

Posted by admin in Boat Launch, fishing

≈ Leave a Comment

Tags

boat, boating, crabbing, fishing, north coast, ramp

North Coast Boat Launch Facilities

Boating is a popular form outdoor recreation in the Pacific Northwest, whether going out for some fishing and crabbing or just to enjoy the sites, boat ramps along the coast are well used.

The following boat launch facilities will put in you in the area to catch fish and crabs whether you are fishing the infamous Bouy 10 area of the Columbia river estuary or adventuring in the Bays from Nehalem, Tillamook, and Nestucca, the large bays in the North Coast offer tremendously healthy fisheries. If you like to just go for a boat ride and look at the native wildlife swimming around in the water and flying above then these locations will also serve your need of finding a place to enjoy the wildlife of the Oregon Coast.

View Oregon North Coast Boat Ramps in a full screen map

The Warrenton marina is a popular boat launch location near the popular Buoy 10 fishery on the Columbia. The salmon fishing is some of the best in the area with the most popular time of year being in August.

The Johns Day Ramp on the Columbia River near Astoria is a place to launch your boat and have access to the incredible fishery of the Columbia. Regardless of what you are going after this can be a good place to drop your boat into the water and go enjoy the river.

The Nehalem Landing County Boat Launch is perfect for launching into the Nehalem river / bay right near the city of Nehalem this launch is well maintained and cleaned by the Tillamook County and is great facility for the area.

The Nehalem Bay state park is a nice option on the ocean side of the bay. The park iteself is a popular place to hang out with the family and has lots of camping options and a great beach.

Launch right near the mouth of the pacific on Nehalem Bay at the Jetty Fishery Mariana and RV Park. This is a good place to take the kids if you are looking to expose them to crabbing and the bay wildlife, but do not have a boat, there are rentals and other accommodations on site.

Port of Garibaldi has a large marina area adjacent and if you are looking for a place to moor a large fishing boat then this is the spot. Regular guided fishing and crabbing trips operate out of the Port of Garibaldi and if you are looking for a chance of pursuing fish out in the Pacific ocean a summer time Tuna or Rockfish trip can be a lot of fun with the large charter boats operating from the Port of Garibaldi.

Sollie Smith is a great Wilson River boat launch located just off Wilson River Loop. The Wilson river is a well known salmon and steel head fishery and fishing from a drift boat is one of the best ways to target these fish. Boaters use this ramp as both a put in and pull out location depending on the stretch of river that they are fishing.

Mills Bridge is another drift boat launch location on the Wilson River that many boaters use to start there drift to pursue the fish in the river.

Memaloose Point Boat Launch is a county run boat ramp that is on the other side of the Tillamook bay from the Port of Garibaldi. This launch ramp is great for accessing other fishing holes in Tillamook bay and is easy to reach just being outside the town of Tillamook.

Netarts Bay Marina is available for putting your boat into Netarts bay. People enjoy crabbing in Netarts bay and due to being a tad further than Tillamook locations can be a little less busy when lots of people are at the coast from the Portland area.

Little Nestucca Boat Launch is at the mouth of the Little Nestucca into the Nestucca Bay. This area receives a substantial run of Salmon and some steel head as well and so is a favorite destination for many angers along the Oregon Coast.

Digging for Razor Clams

07 Wednesday Jan 2015

Posted by admin in clam, fishing, Gearhart, Seaside

≈ Leave a Comment

Tags

chowder, clam, digging, fried, oregon, razor, shellfish

The best tasting clam in Oregon

The razor clam that inhabits the Oregon beaches is known as Siliqua Patula, it is a very large and delicious clam that can be dug out of the sand during a low tide. This clam is found from all the way north in Alaska down to the middle of California and prefers to live in the beaches with large deposits of sand. If you wake up early in the morning in Seaside on a low tide you will be amazed at how many people are out digging up one of the most delicious dinners the coast has to offer. People can find them during the lowest tides of each cycle when the surf is relatively calm and the clam “shows” meaning that you can see either a small hole, a dimple in the sand, or a disturbance in the receding water from each wave that washes to shore. The razor clam is best when prepared simply with just a light batter and fried, but also can be used in clam chowder, clam fritters, seafood stews and other dishes.

Razor clams are known for moving quickly in the very soft sand with their large digger foot and so once you begin to disturb the area move quickly until you have reached it and pulled it out of the hole. always check your local regulations for the proper season to be able to go clamming and make sure that you know the limit that can be harvested. Steep fines are associated with clam diggers that over harvest or take during out of season. Always have a separate bag for holding the clams for every digger in your party as it is a big no no to put all your clams in one bag or to dig for someone else.
digging razors

When to go clam Digging?

The most popular times to pursue these bivalves is during a low tide. Review the tide tables and look for times that the tide is going to be a low minus tide and preferably the lower minus tides of the month. Clam diggers should plan to get to the beach an hour and half before the low tide to start looking for the signs of clams. Sometimes it can take only a matter of minutes to dig a limit of these tasty morsels while other days it may take up to an hour or more if the surf is rougher and the clams are deeper and not showing as easily.
clams for everyone

What do you need to find clams?

There are two primary tools for digging razor clams. The clam shovel and the clam gun. Of course you can always just use your hands, but you will likely quickly be reminded why these creatures have the word razor in their name. The sharp and thin shells can cut your fingers deep very easily. Due to the soft nature of the shells it is very important to be careful while digging with a shovel as it is very easy to crack or cut them in half, while the bits and pieces are still very edible, they will no longer retain the same impressive look on the plate that a full clam has, so be careful with whatever tool you choose.

The Clam Shovel, is a short handed shovel to mid torso length at the longest and has a very flat blade that is about 9 – 11 inches in depth. It is important when digging with a shovel to position the blade about 4 inches away from the clam show, between the hole and the ocean. Go straight down and barely lift back with the handle and pull the sand straight up. This will remove the dirt without breaking the shovel, for a clam that is deeper you may need to repeat the process a couple of times. These clams move quickly in the wet sand so be ready to reach down and grab them before they disappear into the liquefied sand of the surf.

The clam gun is designed to quickly reach the clam and pull it out in one full motion. the gun will be a circular tube with handles and a vent hole. Simple place the gun over the show, drive it all the way down, put your finger over the air vent and pull up. Make sure to lift with your legs and not your back otherwise you can quickly wear yourself out and even cause an injury to yourself. The wet sand grips the gun tightly and can require some serious pulling on to get moving. Repeat if necessary to reach the shellfish.

Here is how to do it

Getting it done with the shovel. Use the butt end to pound the sand and find the shows and then dig up your prize.

The clam gun makes it quick and easy for anyone to dig a clam in the sand.

Cleaning the Clams

There is lots of ways to clean a razor clam. Some people like to slightly boil them and then quickly place them in ice water to stop the cooking process. This can make the shell removal easier, but risks cooking the meat. I prefer to remove the shells with a oyster knife and then continue to process them, removing the nasty parts of the gut and intestine and cleaning the siphons so that the meat is ready to be panko crusted and fried or chopped up into the best chowder meat ever.
cleaning razor clams Razor Clam with no shell

The standard fried razor clam recipe
razor clam recipe

♣ Recent Posts

  • Sharks along the Oregon North Coast
  • Swimming Dolphins Off Oregon Coast
  • Oregon Sport Fishing Halibut Season 2015
  • Underwater Look At Tide Pool
  • Oregon North Coast Boat Launch Locations

♣ Archives

  • September 2015
  • July 2015
  • May 2015
  • April 2015
  • January 2015
  • December 2014
  • July 2014
  • May 2014
  • April 2014
  • January 2014
  • October 2013
  • July 2013
  • June 2013
  • May 2013
  • April 2013
  • March 2013
  • February 2013
  • January 2013
  • November 2012
  • October 2012
  • September 2012
  • August 2012
  • July 2012
  • June 2012
  • May 2012
  • April 2012
  • March 2012
  • February 2012
  • January 2012
  • December 2011
  • November 2011

♣ Categories

  • Antique & Thrift Store
  • Astoria
  • Bandon
  • Bar
  • Beach
  • Boat Launch
  • Breakfast
  • Brookings
  • Cannon Beach
  • clam
  • Cloverdale
  • Coos Bay
  • crab
  • Depoe Bay
  • fishing
  • Florence
  • Food
  • garibaldi
  • Gearhart
  • General
  • Lincoln City
  • Lodging
  • Lunch
  • Nehalem
  • Newport
  • Oregon Coast Treasure
  • Outdoor Location
  • Pacific City
  • Pictures
  • pier
  • Port Orford
  • Reedsport
  • Restaurant
  • Rockaway
  • Seaside
  • Shopping Destination
  • Tillamook
  • Uncategorized
  • Warrenton
  • Wheeler
  • Yachats

Proudly powered by WordPress Theme: Chateau by Ignacio Ricci.